A slim ID badge holder with a lanyard, in glossy Italian calfskin embossed with a crocodile pattern; the leather lanyard comes in the same color. Two top-loading card slots on the front, a clear ID window on the back, gold-tone metal rings and clip, and GENTCREATE in gold foil low on the front. The holder is 10.3 x 7.5 cm (4.06 x 2.95 in) and the lanyard is 89 cm (35.04 in) in total length.
Key facts
-
Leather: Italian calfskin, crocodile-embossed, polished glossy finish
-
Front: 2 top-loading card slots
-
Back: 1 clear ID window, framed in stitched leather
-
Lanyard: leather, in the same color as the holder, 89 cm (35.04 in) in total length
-
Hardware: gold-tone metal rings and clip
-
Finish: stitched all the way round, with painted edges
-
Size: 10.3 x 7.5 cm (4.06 x 2.95 in), taller than it is wide
-
Logo: GENTCREATE in gold foil, centered low on the front
-
Holder size: 10.3 x 7.5 cm (4.06 x 2.95 in), portrait
-
ID window: vertical badge, 8.56 x 5.4 cm card upright
-
Horizontal badges: do not fit
A leather badge holder in glossy croc-embossed Italian calfskin
The badge holder is made from calfskin from Italy, embossed with a crocodile pattern of large tiles and polished to a high gloss that catches the light on every tile. The pattern is embossed into calfskin; it is not exotic skin. The holder is stitched all the way round, and its edges are painted for a clean, finished line.
Two card slots on the front, a clear ID window on the back
The front of the badge holder has two top-loading card slots for the cards you reach for during the day, such as a key card or a transit card. The back has a clear ID window framed in stitched leather, so an ID or access badge can be shown without taking it out of the holder. GENTCREATE sits in gold foil on the front, centered near the bottom edge.
An ID badge holder with a leather lanyard, gold-tone rings and clip
The lanyard is leather in the same color as the holder, 89 cm (35.04 in) in total length, and it is worn around the neck. Gold-tone metal rings and a clip join it to the top center of the holder, so the holder hangs upright from the lanyard.
A portrait badge holder, 10.3 x 7.5 cm (4.06 x 2.95 in), for the office and events
At 10.3 x 7.5 cm (4.06 x 2.95 in), the badge holder is taller than it is wide and stays flat and slim on the lanyard. It carries a work ID, an access card or an event pass, and it slips into a jacket pocket or a bag when it is not being worn.
What fits in the ID badge holder: vertical badges and two cards
The holder is 10.3 x 7.5 cm (4.06 x 2.95 in), taller than it is wide, so it takes cards upright: a vertical ID badge shows through the clear window on the back, and two more cards sit in the top-loading slots on the front. A horizontal badge, 8.56 cm (3.37 in) across, is wider than the holder.
-
Vertical badges: a standard ID or access badge printed upright, 8.56 x 5.4 cm (3.37 x 2.13 in), behind the clear ID window
-
Cards: 2 standard cards standing upright in the front slots, one in each
-
Business cards: US business cards, 8.89 x 5.08 cm (3.5 x 2 in), standing upright
-
Lanyard: the 89 cm (35.04 in) leather loop goes over the head, and the holder unclips from it
-
Horizontal badges: a card on its side is 8.56 cm (3.37 in) wide, wider than the 7.5 cm (2.95 in) holder
-
Badge reel: there is no retractable reel
-
Bills and keys: there is no pocket for them
Caring for glossy embossed calfskin
- Wipe the holder and the lanyard with a soft, dry cloth to keep the gloss bright.
- If it gets wet, blot it and let it dry at room temperature, away from heaters and direct sun.
- Avoid solvents and alcohol-based cleaners, which dull a glossy finish.
- Polish the gold-tone rings and clip with a dry cloth, and hang the holder or lay it flat so it keeps its shape.
Badge holder questions
Is it real crocodile skin?
No. It is calfskin from Italy embossed with a crocodile pattern, not exotic skin.
What does it hold?
It has two top-loading card slots on the front and a clear ID window on the back for an ID or badge card.
How long is the lanyard?
The leather lanyard is 89 cm (35.04 in) in total length, in the same color as the holder.
How does the holder attach to the lanyard?
Gold-tone metal rings and a clip join the top center of the holder to the lanyard.
Does it have a retractable badge reel?
No. The holder hangs from the leather lanyard on gold-tone rings and a clip, with no reel.
Can the holder come off the lanyard?
Yes. A gold-tone snap clip joins the ring on the holder to the ring on the lanyard, so the holder unclips.
What size is it?
The holder is 10.3 x 7.5 cm (4.06 x 2.95 in), taller than it is wide.
Does it take a horizontal badge?
No. The holder is 7.5 cm (2.95 in) wide and a card on its side is 8.56 cm (3.37 in) wide, so the ID window and the slots take cards upright, the way a vertical badge is printed.
Will the lanyard go over my head?
Yes. The leather lanyard is one continuous 89 cm (35.04 in) loop that goes over the head, and the holder unclips from it.
